Skip to content
The Ballistics Report

Laboratory Methodology & Data

Ballistic Testing

Our rigorous testing protocols, state-of-the-art equipment, and scientific methodology that makes our data the most trusted in the industry.

2 min read · Updated Apr 2026

ISOStandards Compliant
100K+FPS Camera Speed
SAAMISpec Compliance

Ballistic Testing: Our Scientific Methodology

Our ballistic testing facility employs state-of-the-art equipment and rigorous scientific protocols to generate reliable, reproducible data. Every test is conducted under controlled conditions with multiple repetitions to ensure statistical validity. Our methodology is transparent and designed to replicate real-world performance as accurately as possible.

Testing Equipment

Doppler Radar: Continuous velocity tracking throughout bullet flight, enabling BC calculation at multiple velocity nodes.
Pressure Transducers: Piezoelectric sensors measuring chamber pressure with 1,000+ data points per firing.
High-Speed Cameras: 100,000+ fps imaging for terminal performance documentation and muzzle blast analysis.
Precision Chronographs: LabRadar acoustic Doppler systems for muzzle velocity measurement with ±0.5fps accuracy.

Velocity Testing Protocol

Velocity testing uses a 10-round sample minimum fired at a standardized distance (typically 15 feet from muzzle for handgun, 15 feet for rifle). Statistical analysis determines average velocity, standard deviation (SD), and extreme spread (ES). Acceptable SD for match-grade ammunition is typically under 10 fps. Velocity is temperature-corrected to a standard 59°F (15°C) for comparison purposes.

Terminal Performance Testing

All terminal performance tests use IWBA (International Wound Ballistics Association) protocols with calibrated 10% ballistic gelatin blocks. Gelatin is prepared 24 hours in advance and calibration verified with a 0.177 caliber steel BB achieving 3.35" penetration at 590 fps. Blocks are photographed pre- and post-shot, and all recovered bullets are measured, weighed, and photographed.

Accuracy Testing

Accuracy testing uses mechanical rests (Ransom Rest for handguns, sandbag and bipod systems for rifles) to eliminate shooter error. Standard group sizes are 5 rounds at 25 yards (handgun) and 5 rounds at 100 yards (rifle). Groups are measured center-to-center of the two widest shots. Temperature, atmospheric pressure, and ammunition lot numbers are recorded with every test.

Data Validation

All published data undergoes peer review by two independent analysts. Outliers are investigated and documented. We openly publish our raw data sets for academic and professional review, maintaining scientific integrity as the cornerstone of our credibility. Any test producing anomalous results is fully repeated before publication.