Skip to content
The Ballistics Report

Weather, Altitude & Air Density

Atmospheric Effects on Ballistics

How temperature, altitude, humidity, and barometric pressure shape every bullet’s journey from muzzle to target.

2 min read · Updated Apr 2026

DADensity Altitude
ISAStandard Atmosphere
+/-3%Velocity Change per 3000ft

Atmospheric Effects on Ballistics

The atmosphere through which a bullet travels is far from uniform. Temperature, altitude, humidity, and barometric pressure combine to create a medium with varying density, which profoundly affects aerodynamic drag and, consequently, every ballistic parameter from velocity retention to trajectory and wind deflection sensitivity.

Density Altitude

Density altitude (DA) is the altitude that corresponds to a given air density in the International Standard Atmosphere. Hot, humid, high-altitude conditions result in higher DA — thinner air — which reduces aerodynamic drag on the bullet. At DA of 5,000 feet vs. sea level, a .308 175gr bullet will retain approximately 3-4% more velocity at 500 yards and experience 5-7% less wind deflection. Modern ballistic calculators require accurate DA input for precise long-range firing solutions.

Temperature Effects on Propellant

Temperature affects not only air density but also propellant burn rate. Most smokeless powders burn faster in warmer temperatures, producing higher pressure and velocity. The velocity difference between a -20°F winter day and a 95°F summer day can exceed 100 fps for many loads — enough to shift point of impact several inches at 500 yards. Temperature-insensitive (TI) powders have been developed specifically to reduce this variation.

Humidity and Its Misconceptions

Contrary to popular belief, humidity actually reduces air density (water vapor is less dense than dry air). Extremely humid conditions (100% RH vs. 0% RH) at standard temperature change air density by only about 0.4%, producing a negligible ballistic effect. The temperature and altitude effects are far more significant. Humidity becomes more relevant at the firearm level, where it affects powder performance and primer sensitivity.

Mirage and Heat Shimmer

Thermal gradients near the ground create visual distortion called mirage. For long-range precision shooters, reading mirage through a spotting scope provides crucial real-time wind information. When mirage runs horizontally, conditions are calm. When it boils (churns vertically), a full-value perpendicular wind is typically present. Angled mirage indicates quartering winds with intermediate effect values.

Altitude Effects on Muzzle Velocity

Higher altitude reduces air resistance on the bullet in the barrel, but this effect is minimal. More significantly, reduced atmospheric back-pressure at the muzzle can marginally increase velocity. The combustion chamber pressure is affected primarily by temperature, not altitude. The primary altitude effect is on the bullet’s flight path after leaving the muzzle, where reduced air density extends supersonic range and flattens trajectory.