Skip to content
The Ballistics Report

Chamber Pressure & Propulsion

Internal Ballistics

The fascinating science inside the chamber — primer ignition, powder combustion, pressure curves, and barrel dynamics.

2 min read · Updated Apr 2026

65KMax PSI (Rifle)
~1msDwell Time
4000°FCombustion Temp

Internal Ballistics: The Physics Inside the Chamber

Internal ballistics — sometimes called interior ballistics — is the study of the processes that occur from the ignition of the propellant to the moment the projectile exits the muzzle. This encompasses primer ignition, powder combustion, pressure curve development, bullet movement through the barrel, and the effects of barrel dynamics on accuracy.

The entire sequence of events in internal ballistics occurs in less than 2 milliseconds, yet the physics involved are extraordinarily complex. Modern instrumentation including piezoelectric pressure transducers, strain gauges, and high-speed optical sensors have enabled unprecedented insight into these rapid events.

Chamber Pressure Curve

The chamber pressure curve represents the pressure-time relationship during firing. Peak pressure typically occurs within the first 20-30% of bullet travel down the bore. The curve’s shape is critical — too steep a rise can cause case head separation, while too gradual limits velocity potential. SAAMI specifications define maximum average pressure (MAP) for each cartridge to ensure safety across a wide range of firearms.

Propellant Chemistry

Modern smokeless powders are double-base (nitrocellulose + nitroglycerin) or single-base (nitrocellulose only) formulations. Burn rate is controlled through grain geometry (ball, extruded, flake) and chemical deterrents applied to the surface. Deterrent coatings create a progressive burn profile — slower initial burn, faster as deterrent burns away — which smooths the pressure curve and improves velocity consistency.

Barrel Harmonics

Every barrel vibrates during firing, flexing in complex patterns called modes of vibration. A bullet exits the muzzle at a specific point in this vibration cycle. If shots are consistent, the bullet always exits at the same point in the cycle, producing consistent accuracy. Hand-loading focuses heavily on finding the charge weight where the muzzle is at a node — a minimum of vibration — during exit.

Throat Erosion

The intense heat and pressure of firing gradually erodes the barrel’s throat and rifling. This erosion increases headspace and freebore, changing the bullet’s jump to the rifling and affecting both accuracy and pressure. High-velocity calibers and those burning large powder charges for their bore diameter exhibit the fastest throat erosion rates.